https://www.onebondadhesives.com/en/single-product/gap-fillers/onebond-041-manual-applicator-gun
OneBond 041 is a hand-held, manually operated applicator gun for applying 4:1 and 10:1 mix ratio epoxies, resins and PUs.
PRODUCT HIGHLIGHTS
- • Manually operated dual cartridge gun for convenient and cost effective application
- • Plunger enables the adhesive to be dispensed in a controlled flow
- • Lightweight portability and durable construction for many assembly operations
- • For applying epoxies and resins
- • Suitable for most 2-part epoxy cartridges 50ml
| PART NUMBER |
QUANTITY |
| 63642597467 |
1 |
https://www.onebondadhesives.com/en/single-product/gap-fillers/onebond-021-manual-applicator-gun
OneBond 021 is a hand-held, manually operated applicator gun for applying 1:1 and 2:1 mix ratio epoxies, resins and PUs.
PRODUCT HIGHLIGHTS
- • Manually operated dual cartridge gun for convenient and cost effective application
- • Plunger enables the adhesive to be dispensed in a controlled flow
- • Lightweight portability and durable construction for many assembly operations
- • For applying epoxies and resins
- • Suitable for most 2-part epoxy cartridges 50ml
| PART NUMBER |
QUANTITY |
| 63642597463 |
1 |
https://www.onebondadhesives.com/en/single-product/sealants/onebond-op34a-pneumatic-applicator-gun-0
Hand-held, professional pneumatic gun for applying 290/310ml standard cartridges and 400 ml sachets. Made of metal. Pressure reducer integrated.
PRODUCT HIGHLIGHTS
- • Pneumatic gun without piston
- • Recommended for applying medium viscosity sealants
- • Connection: ¼ male gas
- • Weight 1.072 g.
- • Working pressure : 4-8 bar
- • OneBond OP34A gun is CE marked: it is in conformity with all the relevant requirements at EU level
- • Users manual included
| PART NUMBER |
QUANTITY |
| 63642599995 |
1 |
https://www.onebondadhesives.com/en/single-product/gap-fillers/onebond-om21-manual-applicator-gun
OneBond OM21 is a full metal frame hand-held, manually operated applicator gun for applying 1:1 and 2:1 mix ratio epoxies, resins and Pus.
PRODUCT HIGHLIGHTS
- • High power so easy pressing out the adhesive
- • Durable product because of the complete metal frame
- • Designed to guarantee accurate and sustainable application
- • Ergonomic moulded grip
- • Nice view on your brand due to a shorter housing for the cartridge.
- • Completely black dispenser so doesn’t show grease and dirt.
| PART NUMBER |
QUANTITY |
| 77696097231 |
1 |
https://www.onebondadhesives.com/en/single-product/glass-bonding/onebond-op34pi-pneumatic-applicator-gun-0
Hand-held, professional pneumatic gun for applying 290/310ml standard cartridges, 400 ml sachets and two component products packed in coaxial cartridges. Made of metal.
PRODUCT HIGHLIGHTS
- • Most indicted for Glass Bonding due the piston mechanism. No risk for the cartridge to enter in contact with the air
- • Recommended for applying medium viscosity sealants and high viscosity glass-bonding adhesives
- • Also suitable for dispensing two-part epoxy and polyurethane based structural adhesives packed in coaxial cartridges by changing the ring nut (the static mixer is not centered).
- • Connection: ¼ male gas
- • Working pressure : 4-8 bar
- • Weight 1.416 g.
- • OneBond OP34PI is CE marked: it is in conformity with all the relevant requirements at EU level
- • Users manual included
| PART NUMBER |
QUANTITY |
| 63642599990 |
1 |
https://www.onebondadhesives.com/en/single-product/sealants/onebond-osp310-pneumatic-spray-gun-0
Hand-held, professional pneumatic spray gun for applying 290/310ml standard cartridges. Made of metal.
PRODUCT HIGHLIGHTS
- • Suitable for MS Seal 45 Spray
- • Sealants can be extruded and sprayed
- • Includes a kit of nozzles to achieve the desired bead shape (Ø 1,6 – 2,5 mm)
- • Includes an anti-clogging nozzle (metal pin)
- • The spraying cap is made of anti-adherent material (POM)
- • Working pressure 3-5 bar (maximum pressure of 8 bar)
- • Nozzle: Ø 1,6 or 2,5 mm
- • Connection: ¼ male gas
- • Weight 1330 g
- • User manual included
| PART NUMBER |
QUANTITY |
| 77696097057 |
1 |
https://www.onebondadhesives.com/en/single-product/glass-bonding/onebond-osp340-18-manual-applicator-gun-0
Hand-held, professional manually operated applicator gun for applying one component products and two component products packed in coaxial cartridges. Made of metal.
PRODUCT HIGHLIGHTS
- • Ring nut made of aluminum
- • Suitable for 290/310 ml cartridges and 400/600 ml sachets
- • Recommended for applying medium viscosity sealants and high viscosity glass-bonding adhesives
- • Thrust ratio: 18:1, hence not suitable for dispensing structural adhesives packed in coaxial cartridges (1:1 & 2:1).
- • Maximum force: 450 Kgf - 4.412 N
- • Progress/Stroke: 4,5 mm
- • Weight: 1182 g
- • OneBond OSP340-18 does not need the declaration of conformity (CE Mark) because this model is not regulated by the EU directive.
| PART NUMBER |
QUANTITY |
| 77696097769 |
1 |
