Gap Fillers


Gap Fillers

Strong, hard wearing, durable epoxies for demanding operational conditions.

https://www.onebondadhesives.com/en/single-product/gap-fillers/onebond-8740
OneBond 8740

2K Heat Resistant

OneBond 8740 is a non-sagging rigid 2-part repair adhesive designed to maintain its properties at high temperatures and in harsh environmental conditions such as UV light, salt water, hydrolysis, and chemicals. It bonds well to thermoplastics (ABS, PC, PVC), metals (steel, aluminium), wood, ceramic, concrete, stone and glass. Constructed with excellent mechanical joint strength, OneBond 8740 is high load bearing, good for large assemblies and can be applied underwater.

PRODUCT HIGHLIGHTS

  • • Open-time from 20 to 25 minutes
  • • Long fixture time (3 to 4 hours) can be accelerated by adding heat
  • • Can be painted and sanded after 4 hours
  • • Resistant up to +150ºC
  • • Cures underwater
  • • Two static mixers included
  • • 2:1 ratio adhesive requires manual dispensing gun


PART NUMBER QUANTITY SIZE
78072764226 Two-part cartridge 2:1 50ml

 

https://www.onebondadhesives.com/en/single-product/gap-fillers/onebond-8422
OneBond 8422

Fast Curing Epoxy

OneBond 8422 is a super flexible fast curing epoxy designed to bond flexible substrates like rubbers (neoprene, NBR), leather and textiles. It can also bond steel, wood, ceramic, concrete, stone, glass and thermoplastics (PVC, PC, ABS) as well as dissimilar substrates (e.g. plastics with metals) and parts subject to vibration and environmental stress. Can be used underwater, ideal for marine applications, swimming pool maintenance and sealing exterior pipe joints.

PRODUCT HIGHLIGHTS

  • • Fast curing
  • • Open time 6-8 minutes
  • • Can be painted after 30 minutes
  • • Can withstand temperatures up to +50°C
  • • Super flexible and cures underwater

 

 

PART NUMBER QUANTITY SIZE
78072764225  Two-part syringe 1:1 24ml

 

 

 

https://www.onebondadhesives.com/en/single-product/gap-fillers/onebond-7790
OneBond 7790

2K Structural Adhesive

OneBond 7790 two-part repair adhesive is designed for high precision bonding and sealing without dripping. It bonds to PC, ABS, PVC, EPS, phenolic resins, flexible plastics (neoprene, NBR), leather, wood, metals (aluminium, steel, zinc) and ceramics and has the ability to bond dissimilar substrates. Recommended to structurally bond parts not subjected to cyclic stress, such as brackets. It has high static load resistance and is transparent in colour for bonding decorative elements.

PRODUCT HIGHLIGHTS

  • •  Fast fixture time (10 to 40 seconds)
  • • Cures fast at room temperature (5-8 minutes), 24 hours before full strength and chemical resistance is achieved
  • • Can be painted after 10 minutes and sanded after 15 minutes
  • • Temperature resistance from -20ºC to +80ºC
  • • Transparent in colour for bonding decorative elements
  • • Two static mixers included
  • • 4:1 ratio adhesive requires manual dispensing gun

 

 

PART NUMBER QUANTITY SIZE
78072764215 Two-part cartridge 4:1 50g

 

 

https://www.onebondadhesives.com/en/single-product/gap-fillers/onebond-8760
OneBond 8760

Fast Curing Putty

OneBond 8760 is a rigid two part fast curing putty designed to bond thermoplastics (ABS, PC, PVC), metals (steel, aluminium), wood, ceramic, concrete, stone. It can be used for repairing tanks, pipes and castings, filling oversized bolt holes, welds and non-structural defects, such as concrete cracks and can be applied underwater. When cured, exhibits high compressive strength and good adhesion. 

PRODUCT HIGHLIGHTS

  • • Short fixture time (2-3 minutes)
  • • For fast repair in vertical and overhead positions
  • • Can be sanded, drilled and painted after 4 hours
  • • High compressive strength
  • • Black in colour
  • • Cures underwater


PART NUMBER QUANTITY SIZE
78072764227 1 Tube 50ml

 

Questions?

We are here to help. Please contact us with any questions you have!

Contact us