Power Lockers & Power Retainers


Power Lockers & Power Retainers

Locks and seals bolts, studs, nuts, and screws, preventing unscrewing due to stress and vibration. Also seals flat surfaces on pumps, gear-boxes, engine covers and housings, eliminating leakages and corrosion.​

https://www.onebondadhesives.com/en/single-product/power-lockers-power-retainers/onebond-070
Onebond

Pipe Thread Sealant (Medium torque, non-sagging)

OneBond 070 is a non-toxic, non-sagging, medium strength pipe thread sealant which can be applied at any angle. It seals in extreme temperatures against gas, water, LPG, hydrocarbons, oils, and many other chemicals. It’s an instant sealant, replacing the need for PTFE tape or yarn and its thixotropic properties prevent migration of sealant from the thread before and during curing. OneBond 070 is also vibration and shock resistant.

PRODUCT HIGHLIGHTS

  • • Can withstand temperatures from -55°C to +150°C
  • • Ideal for filling gaps up to 0.3mm
  • • Full strength after 24 hours
  • • Vibration and shock resistant


PART NUMBER TORQUE SIZE COLOUR
78072764220 Medium 50ml Yellow

 

https://www.onebondadhesives.com/en/single-product/power-lockers-power-retainers/onebond-042
OneBond 042

Thread Sealant (Medium torque)

OneBond 042 is a non-toxic, low viscosity, medium strength thread sealant for hydraulic and pneumatic threads, connectors up to 20mm and small pipes. It seals in extreme temperatures against gas, water, LPG, hydrocarbons, oils, and many other chemicals. It’s an instant sealant replacing the need for PTFE tape, and is vibration and shock resistant.

PRODUCT HIGHLIGHTS

  • • Full strength after 24 hours
  • • Can withstand temperatures from -55°C to +150°C
  • • It is highly resistant to heat, corrosion, shock and vibration


PART NUMBER TORQUE SIZE COLOUR
78072764219 Medium 50ml Yellow

 

https://www.onebondadhesives.com/en/single-product/power-lockers-power-retainers/onebond-116
Onebond

Thread Locker (Medium torque)

OneBond 116 is a non-toxic, medium strength and medium viscosity thread locker for securing nuts and bolts that may need to be dismantled for repair and maintenance. It can be easily applied, with low run-off on vertical surfaces and is highly resistant to vibration, heat, corrosion, water, gas, oils, hydrocarbons and chemicals, and can be used on oily surfaces.

PRODUCT HIGHLIGHTS

  • • Ideal for filling gaps up to 0.25mm
  • • Functional strength after 2-4 hours, full strength after 3-6 hours
  • • Proven unscrewing resistance at +200°C
  • • Can withstand temperatures from -55°C to +200°C and up to +250°C for short periods
  • • Resistant to vibrations

 

 

PART NUMBER VISCOSITY SIZE COLOUR
78072764220 Medium 50g Blue

 

 

 

https://www.onebondadhesives.com/en/single-product/power-lockers-power-retainers/onebond-160
Onebond

Thread Locker & Retainer (High torque)

OneBond 160 is a non-toxic, low viscosity, high strength permanent thread locker and retainer. It’s highly resistant to extreme temperatures, corrosion, vibration, water, gases, oils, hydrocarbons and most other chemicals; and is typically used for holding gears, and sprockets onto shafts; sealing studs, nuts, bolts, and other threaded fasteners. It is also suitable for slip and press fittings.

PRODUCT HIGHLIGHTS

  • • Ideal for filling gaps up to 0.15mm
  • • High strength to avoid loosening caused by stress and vibration
  • • Can withstand temperatures from -55°C to +150°C
  • • Functional strength in 6-12 hours, full strength after 24-36 hours

 

 

PART NUMBER TORQUE SIZE COLOUR
78072764222 High 50ml Green

 

 

 

https://www.onebondadhesives.com/en/single-product/power-lockers-power-retainers/onebond-074
OneBond 074

Flange Sealant (Non-sagging)

OneBond 074 Flange Sealant is a non-toxic high viscosity non-sagging adhesive with low strength, typically used as a form-in-place gasket for metal joints in pumps, gearboxes, engine casings and threaded joints. It creates a flexible film resistant to vibration, temperatures up to 150°C, oils, fuels and industrial fluids.

PRODUCT HIGHLIGHTS

  • • Ideal for filling gaps up to 0.3mm
  • • Can withstand temperatures from -55°C to +150°C
  • • Full strength after 24 hours
  • • Non-dripping and resistant to vibration


PART NUMBER TORQUE SIZE COLOUR
78072764221 Low 50ml Yellow

 

Questions?

We are here to help. Please contact us with any questions you have!

Contact us