Thread Lockers & Sealants

Home
thread lockers sealants

Locks and seals bolts, studs, nuts, and screws, preventing unscrewing due to stress and vibration. Also seals flat surfaces on pumps, gear-boxes, engine covers and housings, eliminating leakages and corrosion.

OneBond 160

https://www.onebondadhesives.com/en/single-product/thread-lockers-sealants/onebond-160

Thread Lockers & Sealants

Anônimo

Thread Locker & Retainer (High torque)

OneBond 160 is a non-toxic, low viscosity, high strength permanent thread locker and retainer. It’s highly resistant to extreme temperatures, corrosion, vibration, water, gases, oils, hydrocarbons and most other chemicals; and is typically used for holding gears, and sprockets onto shafts; sealing studs, nuts, bolts, and other threaded fasteners. It is also suitable for slip and press fittings.

PRODUCT HIGHLIGHTS

• Ideal for filling gaps up to 0.15mm
• High strength to avoid loosening caused by stress and vibration
• Can withstand temperatures from -55°C to +150°C
• Functional strength in 6-12 hours, full strength after 24-36 hours
• Non-toxic

PART NUMBER	TORQUE	SIZE	COLOUR	QUANTITY
78072764222	High	50ml	Green	1 bottle

OneBond 074

https://www.onebondadhesives.com/en/single-product/thread-lockers-sealants/onebond-074

Thread Lockers & Sealants

Anônimo

Flange Sealant (Non-sagging)

OneBond 074 Flange Sealant is a non-toxic high viscosity non-sagging adhesive with low strength, typically used as a form-in-place gasket for metal joints in pumps, gearboxes, engine casings and threaded joints. It creates a flexible film resistant to vibration, temperatures up to 150°C, oils, fuels and industrial fluids.

PRODUCT HIGHLIGHTS

• Ideal for filling gaps up to 0.3mm
• Can withstand temperatures from -55°C to +150°C
• Full strength after 24 hours
• Non-dripping and resistant to vibration
• Non-toxic

PART NUMBER	TORQUE	SIZE	COLOUR	QUANTITY
78072764221	Low	50ml	Yellow	1 tube

OneBond 116

https://www.onebondadhesives.com/en/single-product/thread-lockers-sealants/onebond-116

Thread Lockers & Sealants

Anônimo

Thread Locker (Medium torque)

OneBond 116 is a non-toxic, medium strength and medium viscosity thread locker for securing nuts and bolts that may need to be dismantled for repair and maintenance. It can be easily applied, with low run-off on vertical surfaces and is highly resistant to vibration, heat, corrosion, water, gas, oils, hydrocarbons and chemicals, and can be used on oily surfaces.

PRODUCT HIGHLIGHTS

• Ideal for filling gaps up to 0.25mm
• Functional strength after 2-4 hours, full strength after 3-6 hours
• Proven unscrewing resistance at +200°C
• Can withstand temperatures from -55°C to +200°C and up to +250°C for short periods
• Resistant to vibrations
• Non-toxic

PART NUMBER	VISCOSITY	SIZE	COLOUR	QUANTITY
78072764220	Medium	50g	Blue	1 bottle

OneBond 042

https://www.onebondadhesives.com/en/single-product/thread-lockers-sealants/onebond-042

Thread Lockers & Sealants

Anônimo

Thread Sealant (Medium torque)

OneBond 042 is a non-toxic, low viscosity, medium strength thread sealant for hydraulic and pneumatic threads, connectors up to 20mm and small pipes. It seals in extreme temperatures against gas, water, LPG, hydrocarbons, oils, and many other chemicals. It’s an instant sealant replacing the need for PTFE tape, and is vibration and shock resistant.

PRODUCT HIGHLIGHTS

• Full strength after 24 hours
• Can withstand temperatures from -55°C to +150°C
• It is highly resistant to heat, corrosion, shock and vibration
• Non-toxic

PART NUMBER	TORQUE	SIZE	COLOUR	QUANTITY
78072764219	Medium	50ml	Yellow	1 bottle

OneBond 070

https://www.onebondadhesives.com/en/single-product/thread-lockers-sealants/onebond-070

Thread Lockers & Sealants

Anônimo

Pipe Thread Sealant (Medium torque, non-sagging)

OneBond 070 is a non-toxic, non-sagging, medium strength pipe thread sealant which can be applied at any angle. It seals in extreme temperatures against gas, water, LPG, hydrocarbons, oils, and many other chemicals. It’s an instant sealant, replacing the need for PTFE tape or yarn and its thixotropic properties prevent migration of sealant from the thread before and during curing. OneBond 070 is also vibration and shock resistant.